Monday, April 27, 2009

550hp Chevrolet Matiz

General Motors has no idea that their baby Chevrolet Matiz is now capable of slaying their greatest giant the Corvette. It's not an officially-manufactured car but it will take care of some serious supercars in any straight-line battle. Created by Fourdin Auto Sport founder, Yves Fourdin, and a few friends, this Matiz was the result of 1,500 hours of hard work by people who are not even engineers but motorsport enthusiasts. Best of all they used no computers for their achievement.

Using the Matiz as a base, Fourdin and his team installed a 7.0-litre V8 straight out of a Corvette Z06. It makes 550hp (404kW) to blast the Matiz from 0 - 100km/h in a swift 3.7 seconds. The 0 - 200km/h time is 10.94 seconds while terminal velocity is 260km/h (162mph).

No details on its track performance were released so there's no telling how it takes to corners, bar a glimpse of it taking that long curve on the video. The car was finished in August 2008 and is currently being shown at the International Racing Show Liège in Belgium.

Hartge Reveals BMW M3 Aerodynamic kit

Previously tuning house HARTGE had released a full range of accessories for the BMW M3 that include aluminium pedals, an aluminium handbrake handle and HARTGE gear knob. A new range of exterior accessories is now available from HARTGE.

Listed are a front spoiler lip, carbon add-ons for the front spoiler lip, and side sills for both right and left rear. This applies to both the coupe (codename E92) and convertible (E93). A rear diffuser and a lip for the boot lid are also offered but only for the M3 sedan and coupe, not for the convertible. The exterior side mirrors get a set of carbon casings. Side profile pictures are not available at this point.

The current BMW M3 comes only in three body types; a coupe, a convertible and a sedan. There's no word on a Touring wagon version. It uses a naturally aspirated 4.0-litre V8 engine to produce 420hp (309kW) and 400Nm of torque.

Mazda RE-Amemiya Genki 7

Isami Amemiya founded RE Amemiya Car Company in Chiba, Japan way back in 1974. The tuning company has been specialising in the modification of cars fitted with the rotary engine. For a long time these have been exclusively Mazda RX-7s. At this year's Tokyo Auto Salon RE Amemiya presents the Genki7.

The Genki7 is built from an RX-7 and it apparently features an engine tuned by long-time RE Amemiya collaborator GReddy. No numbers were tossed alongside the pictures apart from the claim that the engine will help the Genki7 "leave everyone behind".

UK Garage Presents Lotus Extrema

Italian tuner UK Garage is presenting its latest project, the Lotus Exige-based Extrema. UK Garage works on such names as TVR, Noble and Radical. Plenty of work has gone into the Extrema from when it was an Exige up until its current format.

Beginning with engine, buyers are spoiled for choice as they wade through a list that comprises exclusively of GM powerplants. At the entry point is a 2.6-litre with 360hp (265kW) followed by a 2.8-litre making 450hp (331kW) or a 560hp (412kW) 3.4-litre version. All three use a PowerTech V8 engine weighing 95kg. With this engine total vehicle mass does not exceed 750kg.

Moving to the next menu is GM's 2.8-litre V6 turbo that either produces 300hp (221kW) or 350hp (257kW). With this mill fitted the car goes up to 850kg in weight which is still very light. Up the performance ladder is where things get more interesting. UK Garage offers potential customers a register comprised of Chevrolet and Corvette powerplants that will be fitted into their Extremas. Again starting from the bottom there are two Chevrolet LS3s making either 420hp (309kW) or 500hp (368kW) each. At this level weight goes up a notch to about 970kg.

Those who long for absolute Extrema grunt, the 513hp (377kW) LS7 or the LS9 found in a Corvette ZR1 with 647hp (476kW) can be selected. This time vehicle mass reaches 1,000kg. This particular combination allows the Extrema to reach 100km/h from standstill in 2.8 seconds, 0 - 200km/h in 7 seconds and top off at 320km/h. Gearshifts are taken care of courtesy of either a manual or a sequential transmission system.

The Extrema has an aluminium chassis, and buyers can have either fiberglass or a kevlar-carbon composite body fitted. The body has been lengthened by some 20cm to accommodate these big engines. It has also been widened for the bigger tyres and equipped with an adjustable suspension system.

All this comes at a price of €66,000 including taxes for the baseline model while road-legal conversions can be made at extra cost.

Sunday, April 26, 2009

Carlsson SL CK63 RS

Carlsson has finally released details regarding the amazing SL CK63 RS which first debuted at the Essen Motor Show.

Based on the Mercedes SL 63 AMG, Carlsson reworked the standard car's V8 engine with 525 hp (386 kW) and 465 ft-lbs (630 Nm) of torque to produce 600 hp (411 kW) and 705 Nm (520 ft-lbs) of torque. This pays modest dividends in terms of performance as Carlsson estimates the SL CK63 RS will rocket to 62 mph in 4.1 seconds while the fore mentioned SL 63 AMG is a few ticks slower at 4.5 seconds. The vehicle's top speed has also been increased to 325 km/h (202 mph).

Carlsson engineers also threw in several other performance minded changes including an electronic lowering C-Tronic suspension, a high-performance carbon composite braking system, and ultra light 20-inch wheels outfitted with high-performance Dunlop SP SportMaxx tires.

The exterior features a new aerodynamic kit which includes a reworked bumper with mesh inserts for the air intakes and a new front spoiler and rear diffuser which are both constructed of lightweight polyurethane. A unique stealth titan graphite paint scheme with a matte finish is available but if that doesn't suit your tastes there are five other exterior colors to choose from. Inside, the car gets a luxurious treatment of leather and alcantara applied to the seats and door trim.

German pricing starts at a rather pricey €272,500 but cars as exclusive as this never come cheap.

Wald Tuned Nissan GT-R

Wald International has officially introduced their new body package for the Nissan GT-R. The Japanese tuner has not released any engine modifications, citing the "difficulty in tuning the GT-R's engine."

The company has created several carbon-fibre body parts to lighten the vehicle's weight and make the car more aerodynamic. They custom built a front-lip spoiler and nose cover, and rear wing. Low-drag duct covers from another lightweight composite material are in place, while under the hood the cutomer will find a carbon-fibre engine cover.

Wald's aero-kit comes in the glossy finish typically used for street cars, called wet carbon fibre, or a dull matte grey color, called dry carbon fibre. The second choice is usually used on racers. A wet carbon kit starts at 1,039,500 yen ($11,620), with the dry carbon kit going for about 2,362,500 ($26,410). Prices include taxes.

All Carbon-Fiber Lotus Elise

Carbon fiber saves a lot of weight and is increasingly used in performance cars. But making a whole car out of carbon fiber may just end up being a tad too expensive. But someone has given it a go anyway.

Pictured here is a 2002 Type 72 JPS Lotus Elise built (or re-built?) to order for a Chinese customer by TW Auto Limited.

The Hong Kong based TW Auto has completely replaced both the interior and exterior with customized raw carbon fiber panels. The weight saved on the already feather-ous Lotus Elise? 66 to 88 pounds (or about 40 kg).

Additionally, the diet also included a lighter KW suspension, Lotus Racing exhaust, JP Racing wheels, as well as bigger air intake and air filter.

The re-working of the Elise took a whole 6 months for TW to complete for customer Jimmy Wong.

Hamann BMW X6 TYCOON Widebody


German tuners Hamann Motorsport has just released their BMW X6 Tycoon to the public. Featuring a new body, restyling, and serious performance upgrades shows the full potential of BMW's crossover SUV.

Currently, customers get a choice between the BMW X6 xDrive35i, which comes with a 306 horsepower 3.0-liter inline-six, the BMW xDrive30d and its 235 hp 3.0-liter straight-six diesel, or the xDrive35d, which has a 3.0-liter inline-six-cylinder getting 286 hp. Horsepower for the three is bumped up significantly, reaching 360 hp on the petrol. The two diesels see increases to 261hp and 316hp respectively.

Torque output sees substantial gains, rising by 140 Nm to 540 Nm on the 35i model, by 80 Nm to 600 Nm on the xDrive30d, and from 580 Nm to 660 Nm on the 35d.

Hamann is also working on a performance kit for the top-of-the-line BMW X6 xDrive50i. Currently, that car is rated at an impressive 407 hp and 600 Nm of torque, generated by its 4.4-liter V8 twin-turbo.

Hamann's design team put together a body kit for the car meant to give the car a more muscular stance. The package is highlighted by new front wings, and a rear wing extension, all made out of a lightweight composite material. A new apron with large air intakes, and LED daytime running lights round out the front. Wrapping up the back is a three-part diffuser, a rear spoiler, and a roof spoiler.

Hamann uses their Design edition Race Anodized 23-inch rims on the car, wrapped in 315/25 r23 tyres. An ultralight wheel, it is paired with "special chassis springs" and "progressively coiled springs" to lower the crossover by 40 mm.

The tuner firm added their own touches to the interior as well. Customers will find a sizeable amount of aluminum and carbon fibre throughout the inside. New instrument dials and a 3-spoke steering wheel are also included.

The Hamann BMW X6 Tycoon editions are available now from the German company. A BMW X6 Tycoon based on the xDrive50i should arrive soon.

Saturday, April 25, 2009

Mercedes SL Evo II by KICHERER

This Mercedes by Kicherer is not the new SL. It is not the SL 63 AMG. It's all Kicherer. At least, that's what the German tuner claims. And we make no arguments against that.

The Kicherer Mercedes SL Evo II is based on the old Mercedes SL R230. But Kicherer has made it its own, with a carbon fiber rear wing and front skirt, hand-made, lightweight cast wheels and a few other in-house goodies.

The whole package also includes new side air intakes to make the SL Evo II breath a little easier and carbon fiber aerodynamic paneling all around, including a rear diffuser, lessen air resistance. The lightweight rear wing makes up the patented KICHERER Downforce-System, an electronically controlled flap that optimizes down force on the rear axle for maximum performance and stability.

For even stickier handling, a suspension lowering by an additional 25 mm is made possible through a re-programming of the electronic suspension system.

SPI 997 SLEDGEHAMMER 1000 hp Porsche Conversion Package

Switzer Performance Innovations (SPI) of Ohio, USA, is a renowned tuner of Porsche products, specifically for the Porsche 996 and 997 models. At some point SPI, through owner Tym Switzer wondered what the limits of a tuned 997 would be, how much horsepower a stock engine could take.

Soon SPI was working on this ‘experiment' and the results are here for all to see. The car aptly named the SLEDGEHAMMER makes over 850 all-wheel horsepower running on racing fuel. That translates to over 1000hp at the crank. The figures were produced from a 997 twin turbo engine through extensive ECU tuning, the use of SPI-developed headers, a sports exhaust system, an intercooler package and SPI-tuned GT30R turbos. Every part of the system was constantly metered and tested by SPI during development.

On tar the SLEDGEHAMMER creates something close to what would be considered magical numbers. The 0 - 60mph time is consistently in the mid-2 seconds, and its massive tractability is shown by a 60 - 130mph time of less than 5 seconds. The quarter mile is trashed in 9.796 seconds and 195mph was almost achieved at the Texas mile, an abandoned air strip in Texas.

Project Kahn Drophead Coupe

The folks over at Project Kahn have just sent out some photos of their Project Kahn Rolls Royce Drophead Coupe. Shown in Black Diamond, this version of the two-door was originally introduced back in July.

These new photos show the elegance of the DHC. The model already sold by Rolls Royce is meant to completely encompass the passenger in luxury, privacy, and quiet, while the driver is able to focus on the road with no distraction.

Project Kahn puts a highlight on the car with their Silver Mist wheel. The large, custom alloy measures 9.5" by 22" making it wider than the stock wheels. This is meant to give "a more sporty and aggressive feel." They also have another, darker grey tone wheel available in the same size. The original Rolls Royce center cap fits in the new wheels.

If you buy the car through the tuner company, it will come new with Elm Cluster Veneer Wood paneling and dash, Rolls Royce embossed front headrests, Piano Black steering wheel spokes, iPod connector, and a polished front radiator grille. Lambs wool rugs are also included, but only the lord almighty knows how to get them clean. Make sure you wipe off your patent leather loafers before stepping in.

You can buy the Project Kahn Rolls Royce Drophead Coupe for £316.000, including taxes.

Supercharged Hummer H3 V8 by Geiger

Someone should tell the good folks over at Geiger that gluttonous, V8 powered SUVs are no longer cool. You know, given the worldwide economic crisis and global warming, excess is out and restraint is in.

But why not fly in the face of all that and have some fun with a Hummer? It's only a baby Hummer, after all.

So let's have a look-see at what German tuner Geiger has cooking for the Hummer H3.

Well, they've taken the stock 5.3 liter V8 and slapped a supercharger on it to squeeze some more life out of the thing - a lot more. What you get is the H3 V8 Kompressor, with Geiger taking the 5.3 liter V8's standard 300 hp and 320 lb-ft (434 Nm) of torque and cranking it up to a galloping 423 hp and 502 lb-ft (680 Nm) of pure power.

What that does is make this high center of gravity vehicle take a scary 0 to 100 km/h (62 mph) run in 7 seconds with a top speed that has to be illegal somewhere for an SUV this size of 238 km/h (148mph).

On the optics side, the full body kit with carbon fiber trim on the inside are best described by the photos that follow.

And if the Hummer brand doesn't survive GM's current troubles, this H3 will look really retro out there on the road. Screaming 90s Detroit automotive narcissism. Ah, those were the days.

Friday, April 24, 2009

Nissan 370Z Tuning Package by Branew

Other Japanese automakers must be green with envy at Nissan's current success with the sports car genre. Tuners on the other hand, salivate each time the Japanese car maker is mentioned. Branew is one such tuner. Also based in Japan, Branew plans to launch a very comprehensive tuning kit for the new Nissan 370Z at the Tokyo Auto Salon in a couple of weeks' time.

Branew developed a new sports exhaust for the car, reprogrammed the standard 332hp 3.7-litre V6's ECU, upgraded its brake system and added a new sports suspension kit. Carbon fibre exterior kit includes front spoiler, side steps, rear spoiler, a rear air diffuser and a rear wing. Multi-spoke alloy wheels will be offered in various sizes for that final touch of performance.

Lamborghini Gallardo GT3 by Reiter Engineering

Reiter Engineering has not wasted precious development moments after letting loose a street-legal version of the Lamborghini Murcielago R-GT. This time Reiter moved swiftly to work on a Gallardo GT3 racecar in order to make it back as a street car.

The Gallardo is based heavily on the standard car with its 5.0-litre naturally aspirated V10. But Reiter's conversion features carbon fibre bodywork that includes fenders widened by 60mm, new front fascia, side skirts and a large carbon fiber rear wing.

The single large exhaust pipe reduces weight and helps add extra horses. Rubber is courtesy of sticky Michelin Pilot Sport 2. Standard seats have also been replaced by leather racing units.

Mitsubishi Lancer EVO X N-Spec by Ings

Japanese tuner Ings has released a front bumper and spoiler kit for the Mitsubishi Lancer Evo X. The N-Spec Lancer Evo 10 CZ4A looks at a glance like many of the other over-sculpted front ends available from various tuners, but the large intake, curious upper-intake ram air inlet, canards, brake ducts and intercooler shrouds of the Ings bumper appear to have been track-tested. The kit will also include a Z-Power wing when it goes on sale in a few months.

Ings plans to offer the front bumper in fiberglass or a "hybrid aero" urethane-fiberglass blend.

There's not much information about the N-Spec Evo 10 at the Ings website, other than the specifications of the demonstration vehicle (which features brake and suspension modifications in addition to the body kit and Ings Sports 18-inch wheels, if you were curious), and pricing has not yet been released.

DStyle Tuning Package for BMW Z4 Coupe & Roadster

The new BMW Z4 Roadster was revealed to us earlier this month, and is yet to be unveiled to the public but that hasn't stopped Germany's Dstyle from releasing new enhancements for the current generation model. The new aerodynamic styling package comes in two versions: Z4 CS for the Coupe and Z4 RS for the Roadster.

The styling is inspired by the world of motorsport and will be limited to just 100 units, it includes a new hood, a revised set of doors, fenders and tailgate along with a set of lightweight forged 19in alloy wheels and sports tires.

Edo Present the Limited Edition Lamborghini LP 710 Audigier

edo competition has just released what they claim to be the fastest Lamborghini ever. The Limited Edition edo Lamborghini LP 710 has a top speed of 224 mph (360 kph). Only five units of the LP 710 will be produced.


At the base of the LP 710 is a Murciélago LP 640. After disassembling the supercar, edo tuners make modifications to the body work, engine, exhaust, interior, tires, and wheels to bring the car up to their racing standards. All mods are completed within three months.

Surprisingly, the company seems more interested in the design of the car than its power. At the heart of the design is fashion magnet Christian Audigier, who chose the matte black paint for the car. Inside, Audigier embroidered his own name into the seats, while utilizing a different set of fabrics and materials for the seats, door paneling, and center console. World-reknowned artist Marcus Pfeil worked with Audigier to create an airbrush design for the car.

Horsepower, torque, and curb weight is unknown at this time.

Each of the five Limited Edition edo Lamborghini LP 710 production units will be custom made, giving the customer a chance to veto some of the designs and make a more personal choice. If you purchase one, you also get the opportunity to run laps in your new supercar at the oval track in either Papenburg, Germany, or Nardo, Italy. edo will even lend out race driver Patrick Simon to teach you a few tricks for your new car.

Tuning Package for C6 Corvette by Innotech

A new company out of the Czech Republic called INNOTECH has released a their new Corvette tuning package, and claims performance of up to 1,000 horsepower! Updates to the classic sports car include exterior body work, interior design, and performance upgrades.

Available through the company are modified Corvette C6 coupes and convertibles with engines reconfigured to crank out between 500 and 560 hp on a standard engine, and 600 hp with the supercharger.

But if you have the twin turbocharged Corvette LS3 6.2 litre engine engine, your C6 can rocket around a course with a blistering 1000 hp.

Numbers like that harken to the Bugatti Veyron supercar. And at 1400 kg, the INNOTECH Vette is lighter than the Veyron by over a half-ton.

Keeping the Corvette transmission choices - six-speed manual, or automatic - the C6 gets a choice of either 14" BAER brakes or 15" Brembos. With that much power, we recommend the biggest brakes possible. Rotors are drilled, slotted, and ventilated. Brake systems mate to forged aluminum 9x19" front- and 12x20" rear-wheels from brands like HRE and Forgeline. Dymag carbon-magnesium wheels are also available. The exhaust system is compltely overhauled to improve performance, and give the car a more unique appearance.

Around the car, INNOTECH is trying to make the car look a bit more Italian than American. New front and rear fascias make the Vette almost unrecognizeable, while maintaining a very cool look. New side rear window louvres and louvred hood is also available. They also have a wide body kit that, like the other body parts, is custom made from fiberglass or carbon fibre. Inside the car, upgrades include Italian or English leather, and carbon fibre seats covered in a matching leather.

Sadly, performance details have not been released, but the company did say that more performance and luxury options will become available later next year. The conpany is also working on customizations for the Z06 and ZR1 Corvettes.

INNOTECH Corvettes will be assembled in the US, despite the company's Czech Republic home base. Parts and complete cars can be delivered worldwide. The new INNOTECH Corvette C6 will be available beginning in January.

Bugatti Veyron Vincero by Mansory

Just in case you have a few million dollars you haven't spent on a Christmas present for yourself yet, we thought we'd let you know that this Bugatti Veyron, modified by Mansory, is sitting on the showroom floor at Prestige Cars in the United Arab Emirates. There's plenty of online disagreement as to whether this car is a Sang Noir that's been further modified by Mansory, or a Veyron that's been redone to resemble another tuned Bugatti. The only common thread we've heard is that Mansory was involved in the conversion, and that it goes by the name Vincero Limited.

The Mansory Vincero bears some similarities to the Sang Noir special-edition Veyron, and we're not sure how many Vinceros are out there. There are reports of as many as three. Any Veyron is an uncommon machine, of course, but the Mansory Vincero is among the rarest of the rare.

Blackout trim and smoked chrome dominate the high-gloss finish. The front fenders and door panels are chromed, and the hood and engine cover are carbon-fiber. The carbon-fiber elements spark the comparison to the Sang Noir editions. The interior gets black and white upholstery, a common Mansory theme, and features woven seatbacks and cushions in addition to the leather, carbon fiber and suede.